Medical care robots being made with 3D origami in B.C. lab

The humanoid sensing robot has a 3D printed finger cap that measures oxygen levels. (Dr. Woo Soo Kim)The humanoid sensing robot has a 3D printed finger cap that measures oxygen levels. (Dr. Woo Soo Kim)
This robotic arm, built in SFU’s Surrey campus, can measure heart rate, breathing, temperature and muscle movements. (Dr. Woo Soo Kim)This robotic arm, built in SFU’s Surrey campus, can measure heart rate, breathing, temperature and muscle movements. (Dr. Woo Soo Kim)

A B.C. professor would like to see a robot take your vitals when you visit a doctor in the somewhat near future.

Dr. Woo Soo Kim, associate professor of mechatronic systems engineering at Simon Fraser University, has developed health care robots that can measure heart rate, respiration rate, temperature and oxygen levels. The oxygen level measurement in particular could be used to monitor severe COVID-19 patients.

He hopes the sensor robots can support doctors and nurses, and is currently using two prototypes to collaborate with a team of Vancouver Coastal Health researchers on how a technology like this could be applied in practice.

There’s a lot to be worked out — including how comfortable will patients be receiving care from a robot – but Kim hopes to have sensing robots in health care in five to 10 years. He imagines a full complement of medical care robots, including passive bots that take vitals, companion bots that would hang out with patients to regularly monitor vitals so people don’t need to wear an uncomfortable device, and even receptionist bots.

We might already be warming up to machine-based medical care, as a recent report indicated most British Columbians now prefer virtual meetings with their doctors for routine check ups.

READ MORE: Majority of British Columbians now prefer routine virtual doctor’s visits: study

His lab, Additive Manufacturing in SFU’s Surrey campus, has been working on advanced 3D printing, wearable technology and sensing robots since he arrived in 2010, and narrowed their focus health care uses in 2018. He works with six to seven students and interns.

Now they have two working prototypes to take to doctors and nurses. One is an arm, completely made in the lab with 3D printed origami. The second machine is a shiny, white humanoid that Kim’s lab has added on their own hand with highly specialized electron sensors.

The origami design was chosen not just because it’s cool. His lab has spent years testing various architectural solids with 3D printing, and found that “3D origami structures have naturally less fatigue characteristics with re-configurable structures. So, it’s good if they are used for bending structures such as our fingers,” Kim said.

Funding has been partially provided by the Natural Sciences and Engineering Research Council of Canada, and the lab is applying for more grants to expand development.

The first stage of robotic health care is passive, with the machines gathering information and sharing results with human health care professionals, but Kim envisions future machines that could be more involved.

Do you have something to add to this story or something else we should report on? Email: zoe.ducklow@blackpress.ca


BC HealthScience

Get local stories you won't find anywhere else right to your inbox.
Sign up here

Just Posted

The old Yount school in Youbou has stood empty for years, but now a group has plans to turn it into a mixed-use property with affordable housing and tourist services. (Submitted)
Group sets sights on tranforming old Yount school property in Youbou

School District 79 has already commenced a process to sell the school through a formal proposal call

North Cowicha to extend the time lines of its official community plan update. (File photo)
North Cowichan to extend time line of OCP review

Municipality also adds $55,000 to OCP budget

Cowichan Capitals’ Logan Rands digs for the puck along the boards in the Alberni Valley Bulldogs’ zone midway through the third period of their BC Hockey League game at the Alberni Valley Multiplex on Saturday, April 10, 2021. (SUSAN QUINN/ Alberni Valley News)
Cowichan Capitals pick up first two wins of BCHL season

Brockman, Moffatt both up to four goals on the year

A nearly four-hour standoff at an apartment complex on Cowichan Lake Road in Duncan ended peacefully on Wednesday, April 14. (Kevin Rothbauer/Citizen)
Standoff at Duncan apartment ends peacefully

Police surround building as homeowner held in apartment by adult son

B.C. Centre for Disease Control maps showing new COVID-19 cases by local health area for the week of April 4-10. (BCCDC image)
Parksville-Qualicum passes Nanaimo in new COVID-19 cases

Greater Victoria had more new cases than any other Island area: B.C. Centre for Disease Control

A woman wears a protective face covering to help prevent the spread of COVID-19 as she walks past the emergency entrance of Vancouver General Hospital in Vancouver, B.C., Friday, April 9, 2021. COVID-19 cases have been on a steady increase in the province of British Columbia over the past week. THE CANADIAN PRESS/Jonathan Hayward
Top doctor warns B.C.’s daily cases could reach 3,000 as COVID hospitalizations surge

There are more than 400 people in hospital, with 125 of them in ICU

The father of Aaliyah Rosa planted a tree and laid a plaque in her memory in 2018. (Langley Advance Times files)
Final witness will extend Langley child murder trial into May or June

Lengthy trial began last autumn with COVID and other factors forcing it to take longer than expected

The corner of 96th Avenue and Glover Road in Fort Langley now has traffic signals, and new “touchless” signal activation buttons. (Matthew Claxton/Langley Advance Times)
Busy Fort Langley intersection gets ‘touchless’ crosswalk signals

The new traffic light started operation in April

A crossing guard stops traffic as students wearing face masks to curb the spread of COVID-19 arrive at Ecole Woodward Hill Elementary School, in Surrey, B.C., on Tuesday, February 23, 2021. A number of schools in the Fraser Health region, including Woodward Hill, have reported cases of the B.1.7.7 COVID-19 variant first detected in the U.K. THE CANADIAN PRESS/Darryl Dyck
COVID-infected students in Lower Mainland schools transmitting to 1 to 2 others: data

Eight to 13 per cent of COVID cases among students in the Lower Mainland were acquired in schools, B.C. says

Norm Scott, president of Royal Canadian Legion Branch # 91, is disappointed the Legion does not qualify for COVID financial assistance from the provincial government. (Black Press Media file photo)
B.C.’s pandemic aid package passing Legion branches by

Federal non-profit status stymies provincial assistance eligibility

Latest modelling by public health shows cases generated by COVID-19 infections into places where it can spread quickly. (B.C. Centre for Disease Control)
Industrial sites, pubs, restaurants driving COVID-19 spread in B.C.

Infection risk higher in offices, retail, warehouses, farms

Hwy. 4 was shut down in both directions for 10 hours on March 23 as a rock bluff was blasted as part of Kennedy Hill’s ongoing construction. Commuters can expect five more 10 hour closures on five consecutive Wednesdays beginning April 28. (Photo courtesy of Ministry of Transportation and Infrastructure)
Five 10-hour Pacific Rim highway closures planned in the next 6 weeks

Closures needed for rock blasting as part of the Kennedy Hill Safety Improvement project.

Bulldogs forward Stephen Castagna flips the puck into the Clippers zone during a game on Oct. 24. (ELENA RARDON / ALBERNI VALLEY NEWS)
Island BCHL game postponed due to ‘potential positive’ COVID-19 test

Nanaimo Clippers team suspends activities, players isolating pending further test results

Most Read